TessaFab lays decorative tile patterns (herringbone, hexagons, tumbling blocks and dozens more) across the top surfaces of the pieces you make. Each tile is filled with lines in its own direction, so neighbouring tiles catch the light differently, and shallow grout runs between them. When a model is made as several pieces that are put together afterwards, the pattern carries on across the seams.
Today TessaFab works on 3D prints: it opens plates sliced in Bambu Studio, OrcaSlicer and PrusaSlicer and rewrites their top surfaces. Nothing changes in how you model or slice.

Two ways to use it
The app. A desktop app for macOS, Windows and Linux. Open your sliced files, put the pieces together, choose a pattern, check it in 3D and export new G-code. Start with Install and Your first pattern.
The command line. tessafab applies a project saved by the app to a sliced plate. It can run as your slicer’s post-processing script, so every slice comes out patterned. See The tessafab command.
Free, open source and Pro
- The app is free to pattern one piece at a time, with every pattern, including your own.
- The pattern engine and the command line are open source on GitHub.
- TessaFab Pro patterns whole assemblies across many pieces and plates, adds image patterns, pattern depth and raised tiles, layered SVG and the unlimited slicer hook, and is licensed for commercial use. Every copy of the app includes a 14-day Pro trial.
Editions compares them in full.
Words used in these pages
| Word | Meaning |
|---|---|
| Plate | One bed’s worth of sliced G-code. A sliced file may hold several. |
| Piece | One separate part on a plate, found by its outer walls. |
| Top surface | An upward-facing skin of a piece, the last fill over an area. The pattern replaces it. |
| Assembly | All the pieces of one model, each where it goes once put together. |
| Pattern | A tile design, set by its parameters (plank width, grout and so on). |
| Preset | Saved parameter values for a pattern, giving a particular look of it. |
| Tile group | Tiles that share a line direction and a filament. |
| Grout | The shallow groove between tiles. |
| Rim | Loops along the edge of a patterned surface, so the pattern ends cleanly. |
| Project | Your sliced files, assembly, pattern and settings, saved as a .tessafab.json file. |