Preview

Check the real new toolpaths in 3D, plate by plate or assembled, layer by layer.

The Preview step (⌘3 / Ctrl+3) shows the result: the exact toolpaths TessaFab will write, not an approximation. If it looks right here, it will print like this.

Preview, close up: each herringbone plank filled with lines in its own direction, with rims along the edges

Show

  • Plate shows one plate as it sits on the bed. With several plates, choose one from the list.
  • Assembled shows the pieces in their assembled places, so you can check the pattern across the seams.

The line under it says how many surfaces were patterned.

Look around

  • Drag to orbit, scroll to zoom. Iso, Top, Bottom, Front, Left and Right (or 0–6) jump to a view.
  • The slider on the right shows a range of layers: drag its ends, or press ↑ / ↓ (with Shift: five layers).
  • Moves, along the bottom, plays the toolpaths in order within the top layer shown: drag it, or press ← / →.
  • The Legend colours each kind of line as your slicer does (walls, infill, top surface and so on). Untick a kind to hide it.

What to look for

  • Every surface you wanted patterned is patterned (a surface the engine couldn’t pattern is kept as sliced, and the log says why).
  • The pattern lines up across seams in Assembled view.
  • Narrow areas: tiles narrower than about 1 mm get few or no lines.

Before trusting a pattern on a long print, print a small test part.